![]() ![]() ![]() Do not use the playground in these temperatures. When the temperature is below 0 degrees, the plastic the playground is made of might become brittle and crack. Place the playground on a level area at least 6 feet away from fences, buildings, tree branches, clothes lines or power lines. Tipsĭo not set the playground on a hard surface such as concrete, asphalt or packed dirt, since falls onto such surfaces could injure children. Pry the small hooks from the tops of the walls, using a slotted screwdriver if needed. Make sure that the bolt covers are closed.ĭisassemble the playground by taking the tunnel off first. Maintain the playground by checking all of the bolts and cap nuts from time to time to ensure that they're tight, particularly at the start of each season of use. Maintaining and Disassembling the Playground The threaded bushings are pre-installed in the tunnel bottom. Put a 1-5/8 inch bolt and bolt cover into the threaded bushings in the three holes in the tunnel bottom. Put a 1-5/8 inch bolt and bolt cover into each of the three holes in the tunnel top, and tighten each with a screwdriver. Put a 1-5/8 inch bolt and bolt cover in each hole in the tunnel top, and tighten each with a screwdriver. Put the tunnel top, which is the piece with pegs, on the shelf-like outcropping at the top of the wall with the bubble window.Īlign the pegs on the inside edge of the tunnel with the holes in the walls at each end of the tunnel. Place a 1-5/8 inch bolt and bolt cover in each hole underneath the tunnel, and tighten each with a screwdriver. Do not over tighten or the bolt covers will not close. Place a 1-5/8 inch bolt and bolt cover in each hole inside the tunnel bottom, and tighten each with a screwdriver. Put the tunnel bottom, which is the tunnel piece that has no pegs, on the shelf-like outcropping at the bottom of the wall with the bubble window. Use a block of wood and a hammer or rubber mallet when connecting the last two walls, those lettered D, to pound the hooks into the openings. Match the walls lettered B and C and assemble them in the same way. You can see more ideas on how to hang a tree swing here.Push down on the hook-bearing wall to lock the walls together. For example, see how other homeowners did this in the image on the right. ![]() Ultra durable and strong nylon straps measure 4 feet long (each) and 2″ wide.Īlternatively, you can buy nylon rope and carabiners separately if you need a custom length. In addition to making installation easy, they are removable and portable, so you can easily hang a swing in several different places. Simply wrap them around a tree branch (or bar or beam for that matter) and clip the swing to the carabiner hooks. Color: Blue, similar swing in pink as well.Ī 2-strap tree swing kit includes 2 straps and 2 safety lock carabiner hooks.However, you can easily fold the T-bar underneath and out of the way when the child gets old enough to not need it anymore. The “stay-put” T-bar and shoulder straps hold babies securely in the seat. Kids from 9 months old to 4 years old can use this swing, so it’s not really just for babies. Of course, you can hang this outdoor baby swing from your backyard tree without having to buy a kit either. All you need is a 2-strap swing-hanging kit. You can hang the Little Tikes 2-in-1 Snug ‘n Secure Swing indoors, outdoors and even from a tree. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |